Page 3 of 5
Posted: Tue Feb 21, 2006 7:42 pm
by Darthness
smoker wrote:dude your not gonna get over that hole are you?
I was joking... i forgot what i was goign to cut it to though. it doesn't matter now, can just measure.
but uhh.. just for the record, my jl sub had mounting holes for the 10, 12 and 14" w1v2 subwoofers. :P
Posted: Tue Feb 21, 2006 7:45 pm
by Justin from Detroit1
OK, for some reason, people don't sem to pick up on this...
Open your subwoofer box. Now take out the subwoofer. See that ring of cardboard that you just took the subwoofer out of? Trace that onto your enclosure.
Posted: Tue Feb 21, 2006 8:28 pm
by Bwcad1
lol i was wondering if anybody realized that... the guy who does my graphics is the one who is working on the new elevation stuff
Posted: Wed Feb 22, 2006 3:37 am
by Darthness
i thought of that justin......
Posted: Wed Feb 22, 2006 4:09 am
by Ryan from Ohio
I can probably get ANL fuses for like $3 each
Wholsale house carries them dude! Audiopipe.
The one local store (The Andersons) carries WH products and has audiopipe stuff. Its extremely cheap in price and I havent had a problem with it yet.
http://www.dragondistributing.com/audiopipefuse.htm
Posted: Wed Feb 22, 2006 5:04 am
by Bwcad1
i dont see a 400 amp fuse there ryan...
Posted: Wed Feb 22, 2006 5:23 am
by smoker
Darthness wrote:I was joking... i forgot what i was goign to cut it to though. it doesn't matter now, can just measure.
but uhh.. just for the record, my jl sub had mounting holes for the 10, 12 and 14" w1v2 subwoofers. :P
one of my customers recently made his own box and just flipped the sub upside down and traced around the outer edge.....yup it fell in....but rather than rebuild it he was crafty enough to just move it over a little and hold it in there with 2 screws.....he actually stopped by to see why it sounded so bad......
Posted: Wed Feb 22, 2006 5:30 am
by Bwcad1
devin had the same issue with some guy
Posted: Wed Feb 22, 2006 5:49 am
by Bwcad1
honestly justin i dont think you will ever blow a 300 amp fuse on 340 watts hell my MM4000.1 pulls 280 amps and i run it on a 60 amp fuse in meca. right now for daily its running on two runs of 1/0 on 2 100 amp fuses. i bet a good a good 10 bucks you throw that 300amp in there and it wont blow. also my mm2000.1 was supposed to have a 180 amp fuse but i ran it on a 100 all day everyday and it never blew.
Posted: Wed Feb 22, 2006 7:34 am
by Ryan from Ohio
Bwcad1 wrote:i dont see a 400 amp fuse there ryan...
http://www.dragondistributing.com/audiopipefuse.htm
Look under the ANL Fuses section.
Part no: ANL-400