Page 2 of 2
Posted: Fri Mar 04, 2005 10:38 pm
by kevinberry1
Those demensions come out to be about 4.2 cubic feet total, so I hope you that is for both subs
Including a baffle and accounting for the thickness of the MDF (or whatever you are using) it should be around 2 cubic feet per sub. I would have to put it all into winISD to get the exact specs, but that seems about right for your subs (i have the same pair of 2004's).
Let me know how it sounds and I may try these demensions myself soon.
Posted: Fri Mar 04, 2005 10:42 pm
by ridr4lif
Actually, after u take into account wood thickness (i assumed .75") it would be 1.65 cu.ft. per sub. before divider and bracing.
TEDD
Posted: Fri Mar 04, 2005 10:49 pm
by MobileAudio219
Yes, there will be two boxes, one per sub. 4" port per sub should be plenty, right?
Posted: Fri Mar 04, 2005 10:56 pm
by ridr4lif
a 3.3 cu.ft. box per 12" comp vr sounds a bit big to me...considering kicker recommends 1.75-2.25 w/ a vent tuning around 38-40hz. Altho if you listen to a lot of music w/ deeper bass i could run a lower vent tuning, i have my box tuned to 38 (kickers spec) and i wish i tuned it lower.
TEDD
edit: visit kickers website and download the tech manual for the comp vr. lots of info and it gives u box designs.
Posted: Sat Mar 05, 2005 12:44 am
by spkrman
ridr4lif wrote:a 3.3 cu.ft. box per 12" comp vr sounds a bit big to me...considering kicker recommends 1.75-2.25 w/ a vent tuning around 38-40hz. Altho if you listen to a lot of music w/ deeper bass i could run a lower vent tuning, i have my box tuned to 38 (kickers spec) and i wish i tuned it lower.
TEDD
edit: visit kickers website and download the tech manual for the comp vr. lots of info and it gives u box designs.
2.5 cubes, 35hz... approx 25-30 sq inches of port... SWEET box :)