Page 2 of 3
Posted: Tue Nov 14, 2006 10:18 am
by Bwcad1
well you might as well start by gutting the trunk and glassing the floor your gonna need the whole trunk for this. can you email me some measurements of the opening behind the seats? i havent checked meca rules lately but i will soon. is cutting the parcel shelf illegal?
Posted: Tue Nov 14, 2006 11:05 am
by OnYrMrk
if it is, I already fail...my parcel shelf is cut due to my subwoofer firing through
Posted: Tue Nov 14, 2006 11:09 am
by Bwcad1
u compete in usaci not meca duh
Posted: Tue Nov 14, 2006 11:24 am
by smoker
it has to be covered....im not sure if it can be cut at all or not ill check....my rear speakers are already oiut and the trunk is gutted.......i figure i got about 13 cf back there if i do it right...
Posted: Tue Nov 14, 2006 11:29 am
by smoker
ok the trunk opening behind the rear seat is rounded at the top corners and it is 22 wide at the top widening to 31 in the center and dropping to 30 at the bottom....it is only 14.5 high though
Posted: Tue Nov 14, 2006 11:39 am
by Bwcad1
thats gonna be an issue. can you open up the area? need a min of 15 inches. if there isnt cutting allowed u could bend it.
Posted: Tue Nov 14, 2006 12:02 pm
by smoker
yea i can get 15 inches out of it....
Posted: Tue Nov 14, 2006 12:04 pm
by Bwcad1
if you do 2 15s ur not gonna have shit for port
can you remove the plastic around the trunk area? can you get me a pic of what the opening looks like? for 2 15s id like to get a min of 8 inches of port.
Posted: Tue Nov 14, 2006 12:14 pm
by cargodz
Sounds like another build coming in the future down at smoker's :)
Posted: Tue Nov 14, 2006 12:46 pm
by smoker
its not a fold down seat but the rules allow me to lay it down as if it were....there is not additional room but let me check the rules and see if the port could come through the rear deck