Posted: Sun Oct 15, 2006 3:50 pm
12 gauge is too much work for wire :P
I think the stuff I'm putting in is 16 gauge.
I think the stuff I'm putting in is 16 gauge.
Car Audio Central - Ultimate Car Audio Forum and Community
A Car Audio Forum dedicated to providing our members with the best audio, video, and alarm troubleshooting.
https://caraudiocentral.net/forums/
screw dimensions to install JL subs?
Page 2 of 2
Posted: Sun Oct 15, 2006 4:27 pm
well then im way off cause i use 8 gage
Posted: Sun Oct 15, 2006 5:03 pm
he has W9 subs
be serious
his subs can only handle half the power I'm delivering to my front stage alone, so 16AWG is plenty for those subs at 150x2.
you can screw the subs in, or pre-drill and use grade 3 bolts to bolt the subs in. I suggest using fine thread nuts/bolts or screws, as they are more resistant to vibration and working loose.
be serious
his subs can only handle half the power I'm delivering to my front stage alone, so 16AWG is plenty for those subs at 150x2.
you can screw the subs in, or pre-drill and use grade 3 bolts to bolt the subs in. I suggest using fine thread nuts/bolts or screws, as they are more resistant to vibration and working loose.
Posted: Mon Oct 16, 2006 4:08 am
my punch p1 came with mounting screws new..
Posted: Mon Oct 16, 2006 4:20 am
some do some dont.
Posted: Mon Oct 16, 2006 6:56 am
thanks for all you help guys
Posted: Mon Oct 16, 2006 8:15 am
No prob Bob!
Posted: Mon Oct 16, 2006 11:35 am
Didn't realize you bought em used with a box, so happy to help with what I could.
Next time try to give us all this info (specifics) on any question and lots of us will chime right in and get you in the right direction :)
Next time try to give us all this info (specifics) on any question and lots of us will chime right in and get you in the right direction :)