Page 2 of 2
Posted: Fri Jun 30, 2006 6:34 pm
by churchbouy
ok thanks
i also 4got the mdf 4 the rings and floor, i am going for a flush mount
Posted: Sat Jul 01, 2006 12:28 am
by joeyc
going to need more than 2 brushes probably
Posted: Sat Jul 01, 2006 3:47 am
by churchbouy
did some reading last night and i figured as much
Posted: Sat Jul 01, 2006 3:48 am
by churchbouy
which is better mixing the filler with the resin or resin then filler
Posted: Sat Jul 01, 2006 6:30 am
by smoker
pour the resing in a mixing cup then add the resin
fiberglass
Posted: Sun Jul 02, 2006 5:40 pm
by churchbouy
let me rephrase should i
a: do the compleate glassing and then do the filler eg
http://www.the12volt.com/installbay/for ... 74519&PN=1 or
b: do i just do the first layer an then a layer of resin/filler mixed and brushed on
Posted: Sun Jul 02, 2006 9:57 pm
by smoker
brush resing where you are putting the fiberglass matt at and then brush on top of the matt
Posted: Mon Jul 03, 2006 2:38 am
by MobileAudio219
Gloves, Mask? Ice water!!!!!!!!!
Posted: Mon Jul 03, 2006 4:02 am
by smoker
ice water good.....one time i was pouring resin into a glass box that i made to add some thickness to the inside and it slopped out the sub hole and went right into my shirt pocket and set my nip on fire.....not a good day when a couple minutes later my fat ass goes running through the shop tearing my shirt off screaming about my nip.......