Page 2 of 2
Posted: Thu Sep 01, 2005 9:09 am
by Bwcad1
looks like im going with 1/0
Posted: Fri Sep 02, 2005 4:26 am
by Bwcad1
ok guys i upgraded the alternator last night and added a 1/0 power wire from alt to battery didnt have time last night to do the ground i will today. but my main question is im still getting some sub cut out. the sub cuts out components get incredibly loud? could that be because i didnt upgrade the ground or is there something else it could be?
Posted: Fri Sep 02, 2005 7:46 am
by GlassWolf
-ground issue
-amp gain set too high
-load on amp too low
one or two of the above
Posted: Fri Sep 02, 2005 8:21 am
by Bwcad1
ground issue i will check tonight. the gains on the amp are set about a quarter from low and the lpf is on with no bass boost. also i measured the ohms on the amps and they were at around 3.8-3.9ohms