Posted: Thu Feb 26, 2009 11:06 am
Already do lol.
ive got 2 200 amp alts from him so far
i might have to sell them to get one of these new ones
Car Audio Central - Ultimate Car Audio Forum and Community
A Car Audio Forum dedicated to providing our members with the best audio, video, and alarm troubleshooting.
https://caraudiocentral.net/forums/
new coolness from nate
Page 2 of 2
Posted: Fri Feb 27, 2009 9:49 am
Posted: Sat Feb 28, 2009 4:40 am
We designed the new pulleys for these 350 amp monsters... Honestly we weren't sure if we could make the 6 groove GM any smaller, but blessed be the magic of math 
The older style 6 groove we did tested out on the 350 prototype charging at around 600rpm... Not good enough for this monster as a daily as sometimes the newer vehicles drop rpms as low as 550, so when we went back to the table we figured a way to knock off over 2 more millimeters off the diameter, guarantying a minimum of 350 amps at 2000 rpm.
And as for the discounted price, keep in mind that $850 is MSRP... Does anybody here actually pay full retail for anything through all us dealers
Oh and I might want to add, some of you may have caught that "at least"... That's because the guaranteed minimum rating on these is 350 amps, but testing has shown that they should put out up to or over 360 amps with the new pulley design.
The older style 6 groove we did tested out on the 350 prototype charging at around 600rpm... Not good enough for this monster as a daily as sometimes the newer vehicles drop rpms as low as 550, so when we went back to the table we figured a way to knock off over 2 more millimeters off the diameter, guarantying a minimum of 350 amps at 2000 rpm.
And as for the discounted price, keep in mind that $850 is MSRP... Does anybody here actually pay full retail for anything through all us dealers
Oh and I might want to add, some of you may have caught that "at least"... That's because the guaranteed minimum rating on these is 350 amps, but testing has shown that they should put out up to or over 360 amps with the new pulley design.
Posted: Sat Feb 28, 2009 5:06 am
Well I got a pulley on the way. I opted to save $5 and get the slightly larger one.
Any help is good help in my case.
Any help is good help in my case.
Posted: Sat Feb 28, 2009 8:07 am
WTF does "UP to Over" Mean? Thats kinda contradictory
Posted: Sat Feb 28, 2009 12:40 pm
up to OR over
Posted: Sat Feb 28, 2009 2:20 pm
owned.
lol
lol
Posted: Sat Feb 28, 2009 5:24 pm
OMG!!! You can't even weed. jk.