Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

kove audio

Post all your general car audio questions here.
jaysway1005
Member
Posts: 34
Joined: Fri Jun 16, 2006 7:10 pm

Post by jaysway1005 »

alright......i found the ssd10..do i want dual 1ohm or dual2ohm?? whats the rms/max on these things??
User avatar
swimmerdude
Master of My Domain
Posts: 1131
Joined: Wed Sep 28, 2005 5:08 pm
Location: Michigan
Contact:

Post by swimmerdude »

rms is stated as 800. The copper coil will aid in a bit of low end a bit in power handling and the flatwind coil will basically do a lot of aiding in power handling. The coil config you want solely depends on the amp you are using. You want to get the coil that will allow you to get most power out of the amp. So with that said, what amp do you have and what are its specs??
jaysway1005
Member
Posts: 34
Joined: Fri Jun 16, 2006 7:10 pm

Post by jaysway1005 »

pioneer mono 800w only 360rms.......but was reading an article on here and was thinking of upgrading to the hifonics brutus http://www.sonicelectronix.com/pictures.php?id=6522
thats the one i was looking at....would that go good with the Fi subs?
if not could you recommend one in that price range? well, under 300 anyway.
User avatar
swimmerdude
Master of My Domain
Posts: 1131
Joined: Wed Sep 28, 2005 5:08 pm
Location: Michigan
Contact:

Post by swimmerdude »

Those hifonics amps are pretty nice. You will be really happy with it. Are you looking at doing 2 10's or just a single 10?? If you are going with 2 10's, get dual 1ohm coils and get the copper coils for both of them. If you are going with a single 10", get the dual 2ohm coil and the flatwind coil option. Either way, it will be loud. But the very very very most important thing is box design. So when you decide on getting these, figure out a good box and either make it yourself or there are a few guys on the forum who make boxes. Box is key if you want to get the most out of them.
jaysway1005
Member
Posts: 34
Joined: Fri Jun 16, 2006 7:10 pm

Post by jaysway1005 »

well i just built a box outta mdf and carpeted it. i dont know how to come up with box numbers...........but the dimensions for each chamber(there are 2 chambers) is w=20" h=11" and it transistons from 5" to8 or 9 inches from top to bottom.
jaysway1005
Member
Posts: 34
Joined: Fri Jun 16, 2006 7:10 pm

Post by jaysway1005 »

man all this cause i put my hand through my kove......keep your hands away from your speakers when intoxicated. lol
Post Reply