Dls A6

[falkenbd]

Does anyone know about this amp? Specifically if there is an older version of it?

The website for DLS says the amp is stable to 1 ohm and is 1200 wrms at this load.

The manual that came in the box for mine (it was used) says the amp is stable to 1,33 ohms.

[Bwcad1]

the math says its capable. looks decent

[falkenbd]

the math says its capable. looks decent

Can you elaborate on this? I really want to know if its 1 ohm stable or not, the website and the manual I got with mine don't match.


Another question I have is, one of the fins is bent, how hard would it be to bend it back without breaking it?

[Bwcad1]

you wont bend it back. and im a tooling guy i know metals.

it has 4 35amp fuses 4 x 35 = 140 total amps

amps 140 x voltage 13.8 = 1932 watts estimated 70% efficency so 1932 x .7 = 1352w

[falkenbd]

you wont bend it back. and im a tooling guy i know metals.

at least i know not even to mess with it.

amps 140 x voltage 13.8 = 1932 watts estimated 70% efficency so 1932 x .7 = 1352w

thanks, i've really got to start remembering that one. i forgot all the electrical formulas i learned in college. some of my required classes were Electrial Engineering, but as a comp sci major i quickly forgot.

So why does the website say its 1ohm stable and my manual says 1,33 ohm stable? I can't find anything about an older version of it. It looks just like all the pictures I see.

[Bwcad1]

not sure. but im sure it would be fine at 1 if its stable at 1.33 your impedance rise will come up enought anyways

[falkenbd]

In the manual it does talk about having two dual 4ohm voice coil subs.
The amp has a fan, and an external fan control and I plan on having it in a false floor with a couple of fans ventilating the amp compartment.