by ridr4lif » Wed Dec 07, 2005 6:58 pm
Ok, you got the power and ground wires correct.
The other 2 wires with headphone like plugs are your RCA's. They plug into the amp and give it the signal.
The small wire that runs back with the power wires is your remote turn on. That is the wire that tells the amp to turn on and off.
Try powering up the remote wire and see if the amp will turn on.
Edit: Also, make sure that there is an inline fuse installed on the power wire.
Ok, you got the power and ground wires correct.
The other 2 wires with headphone like plugs are your RCA's. They plug into the amp and give it the signal.
The small wire that runs back with the power wires is your remote turn on. That is the wire that tells the amp to turn on and off.
Try powering up the remote wire and see if the amp will turn on.
Edit: Also, make sure that there is an inline fuse installed on the power wire.