by sixpac440 » Sat Jun 10, 2006 6:35 am
Hi Ryan and Smoker.
The info on the port is as follows:
"Pre-Cut Slot Port Hole: The box comes configured as a ported enclosure with a tuning frequency of 38Hz, with a pre-cut, 1-1/2" x 11-3/8" slot port with a hard plastic port flange. If the driver manufacturer suggests using a sealed enclosure, or that a sealed enclosure is preferred, you can replace the port flange with a slot port plug, using the same 4 screws from the port flange. Note: There are no provisions for port trimming with the slot port."
Tha Assassin sub is a single 4-ohm. I am looking to run 2-ohms and one sub. Nice price tho!
Six
Hi Ryan and Smoker.
The info on the port is as follows:
"Pre-Cut Slot Port Hole: The box comes configured as a ported enclosure with a tuning frequency of 38Hz, with a pre-cut, 1-1/2" x 11-3/8" slot port with a hard plastic port flange. If the driver manufacturer suggests using a sealed enclosure, or that a sealed enclosure is preferred, you can replace the port flange with a slot port plug, using the same 4 screws from the port flange. Note: There are no provisions for port trimming with the slot port."
Tha Assassin sub is a single 4-ohm. I am looking to run 2-ohms and one sub. Nice price tho!
Six