Car Audio Central - Ultimate Car Audio Forum and Community

200 shipped

elevation, bravox, dls, arc, rainbow, and so on. whats ur price range for them?

hehehe, ok, well i need comps good enough so i dont have to buy rear speakers. I was gonna get RE comps. Gimme some ideas

im not gonna spend the money on comps unless they are 6.5s

why? there are 5.25 comps out there that sound damn fine.....come down to the shop, close your eyes and ill switch between the two...not a hell of a lot of difference in a good set...

ok then ill either get kappa 5.25s or kickers not sure, im not gonna spend the money on comps unless they are 6.5s

i really think 4x6"s suck. i have pretty much the same car as a beater car its a 96 cavilier but you can fit atleast 5 1/4"s with the bracket out of there. just make a mdf spacer ring and you will be all set.

I have no place to do that in nor the experience i would need. They wouldnt turn out at all lol or id do it.

Im thinking im gonna go with the 4x6 infinity kappa plates in the front and the 6.5 kicker midbass woofers on the rear deck.

My amp is either 150 per channel at 4 ohms or 225 at 2 ohms

Im gonna run the kickers at a 2 ohm load which will give em 112 watts they are 125 rms so it should be fine.

The kappas are 2 ohm so im gonna run em at a 4 ohm load giving them 75 rms instead of their rated 60 so it seems like everything will work.

Now with my subs im usin a jbl 1200.1 and each sub is SVC 4 ohm. The subs are 300 rms. the amp is 600 rms at 4 ohms or 1200 at 2 or 1 ohm. Im guessing its like 300 rms at 8ohms? which is the same power as the subs are gettin now. Im probably gonna have to wire em in series until i get either 1 more sub or sell these 2 and get 2 different ones. Think the system will be pretty loud? Right now im using sony 3.5s so and a sony deck so im sure it will be an improvement.

Most of the GMs have a plastic braket the speakers are mounted on.

You could also glas your own kicks for about $30...

if i remember right those have a bracket that the factory speaker mounts to......if you take that out you can do pretty much what ever you want within reason....

With a little bit of modification you can make a 6.5 fit, so i hear. I've never done it myself, but i know other ppl have. It depends on the 6.5.